Industrial Touch Monitors
GHI IT215 21.5-Inch Panel Mount Industrial Touch Monitor — Full HD, 4 Video Inputs
The GHI IT215 is a 21.5-inch panel-mount industrial touch monitor with a Full HD display, 10-point capacitive touch, and four video inputs: VGA, DVI, HDMI, and DisplayPort. A sealed anodized alloy front, SGCC steel rear, and a 516×308 mm panel cut-out make it a solid fit for control cabinets, machine panels, and industrial workstations.
Specifications
- Screen size
- 21.5"
- Panel
- TFT LCD, WLED backlight
- Resolution
- 1920 × 1080 (Full HD)
- Aspect ratio
- 16:9
- Brightness
- 250 nits
- Contrast ratio
- 3000:1
- Backlight lifetime
- 30,000 hours
- Display area
- 476.64 × 268.11 mm
- Viewing angle
- 178° / 178°
- Touch technology
- Projected capacitive, up to 10 points
- Touch controller
- EETI
- Touch durability
- > 100,000,000 touches
- Touch interface
- USB (optional RS232)
- Surface treatment
- Anti-fingerprint (AF)
- Surface hardness
- MOHS 6H
- Front panel
- Magnesium-aluminum alloy, anodized
- Rear panel
- SGCC plate, sand-blasted
- Signal inputs
- 1 × VGA, 1 × DVI, 1 × HDMI, 1 × DP
- Mounting
- Panel mount, VESA 75 / 100 mm
- Overall dimensions
- 527.0 × 318.7 × 51.0 mm
- Panel cut-out
- 516.0 × 308.0 mm
- OSD
- Button on rear panel
- Power
- DC 12 V (optional wide DC 9–36 V)
- Power consumption
- About 25 W
- Operating temperature
- 0–50°C
- Storage temperature
- -20–60°C
- Humidity
- 10–95% @ 10°C (no condensation)
- Vibration
- 50–500 Hz, 1.5 G, 0.15 mm peak to peak
- Shock
- 10 G / peak (11 ms)
- Net weight
- 6.1 kg
- Certifications
- CE, FCC, RoHS
The GHI IT215 is a 21.5-inch panel-mount touch monitor designed to be built into control cabinets, machine panels, and industrial workstations. It fits a panel cut-out of 516 by 308 millimeters, and the overall unit measures 527 by 318.7 by 51 millimeters, so integrators can plan the cut-out and the enclosure depth from published dimensions instead of guessing. A VESA 75 and 100 mount is also available for arm or bracket installation when panel mounting is not the right fit. The unit weighs 6.1 kilograms net, so a single installer can handle it.
The front panel is magnesium-aluminum alloy with an anodized finish, and the rear panel is SGCC steel with a sand-blasted finish, so the unit is rigid enough for factory floors and control rooms where equipment takes daily knocks. The front is sealed against dust and water, which keeps the display working in dusty workshops and washdown areas. An anti-fingerprint coating on the touch surface keeps the screen readable after repeated use, and the on-screen display button sits on the rear panel, out of the way of operators.
The display is a 21.5-inch Full HD TFT LCD panel with WLED backlight, running at 1920 by 1080 in a 16:9 format. Brightness is 250 nits and contrast is 3000:1, which gives control screens, monitoring dashboards, and machine interfaces a clear, high-contrast image. The backlight is rated for 30,000 hours, so the panel keeps its brightness through years of continuous operation. The monitor operates from 0 to 50 degrees Celsius and stores from minus 20 to 60 degrees, at 10 to 95 percent humidity without condensation. It is rated for vibration from 50 to 500 hertz at 1.5 G and for shock up to 10 G, so it keeps working on equipment that shakes and in cabinets that get knocked.
Touch is projected capacitive with up to 10 simultaneous touch points, driven by an EETI controller and rated for more than 100 million touches. That durability matters on a panel that operators press hundreds of times a day. The touch connection runs over USB, with an RS232 option available for legacy control systems, so the monitor connects to both modern industrial PCs and older controllers without adapters.
Video input is where the IT215 stands out. Four inputs are built in: VGA, DVI, HDMI, and DisplayPort. A single monitor can switch between an old VGA controller and a modern DisplayPort workstation, or serve as a shared display for two systems, without a separate switch box. Power is 12 volts DC, with an optional wide-range 9 to 36 volt DC input for vehicle and battery-backed installations, and power consumption is about 25 watts.
The IT215 fits control cabinets, machine HMI panels, industrial workstations, and equipment consoles. GHI has been manufacturing display hardware since 2010, serving more than 2,000 customers worldwide, and our manufacturing is certified to CE, RoHS, FCC, BIS, and REACH standards. OEM and ODM orders are welcome, including custom branding, custom firmware, and custom packaging.
Send us the quantity and power option you need, plus your target delivery date, and we will reply with a quote and the full specifications within one business day.
